Intec K30000-01 Instalační příručka stáhnout pdf (Strana 13)

FORCE

/3 3.0 & 4.0 DP

Set-Up and Operation

SET-UP AND OPERATION

OPERATION:

The FORCE/3 is designed to handle bulk packaged

insulation material. As material is loaded into the hopper the agitator

breaks up and conditions the material for proper density while sweeping

the material down into the airlock. The airlock rotates the material 180

degrees from the lower hopper opening into the airflow created by the

blower system which discharges the material through the hose. As the

material travels through the hose it is buffeted up against the interior

sides of the hose to further conditioning of material.

ELECTRICAL HOOK-UP:

Both power cords need to be plugged

into two separate circuits that are independent of other equipment.

Both circuits need to be rated at 115VAC/20 Amp each in order for the

machine to function properly. Failure to use two independent circuits will

result in continued tripping of circuit breakers within the electrical distri-

bution box or chattering of contactors (relays). When connecting the

power cords to the machine, make sure all the switches are in the “off”

position. Force/3 4.0 DP must be used on at least a 10.5KW generator.

This is due to the high current draw of the blowers.

HOSE HOOK-UP:

Attach the 3" x 50' plastic hose to the outlet of

the machine and secure the hose with a 3 inch hose clamp. The length

of hose does aid in the conditioning process and it is not

recommended to use less then 100' of blowing hose. You may use a

maximum length of 200' of any one size of hose.

ATTIC PREPARATION:

Be sure that all chimneys, flus and heat

generating devices are not covered before insulating. Attic chutes need to

be installed for proper ventilation and portable lighting set up prior to

installing. Additional information on how to prepare your attic for

insulation is available from your local building or home center.

OPERA

TION BY REMOTE:

Position both switches on the main

electrical panel to the

“on” position to allow contr

ol of the machine via

the r

emote cor

SET-UP AND OPERATION

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 37 38

Komentáře k této Příručce

Žádné komentáře

Intec K30000-01 Instalační příručka Strana 13

Komentáře k této Příručce